Residential · Riverside, CA
Potholes, alligator cracking, and sunken spots are signs your pavement needs asphalt patching, not a full replacement. Apex Asphalt Riverside has served Riverside since 2015 with targeted spot repairs that restore safety, drainage, and curb appeal while protecting the surrounding mat.
Good patching starts below the surface. We sawcut the repair area into clean, straight edges, remove failed asphalt, and excavate soft subgrade as needed. The base is rebuilt with Class 2 aggregate base and compacted in lifts with a vibratory plate compactor or roller, then we apply asphalt tack coat to bond new hot mix to the existing pavement and prevent seam failure.
Riverside heat, UV exposure, and occasional heavy runoff can open seams fast if the repair is not sealed and properly sloped. We match the repair type to the problem, including hot mix asphalt skin patches, full-depth patches, and asphalt milling for uneven transitions. After placement, we compact with a steel drum roller to target density, set the correct grade for positive drainage, and finish edges with clean joints so the patch blends and holds up under traffic.
Customers choose us because we treat spot repairs like a structural fix, not a cosmetic cover. You get clear recommendations on patch size, depth, and whether the failure is base-related, drainage-related, or surface oxidation, so you are not paying for the wrong fix. Our crews show up with commercial-grade saws, dump trucks, skid steer support when needed, and the right mix design for durable compaction, plus we keep work areas organized for homeowners, HOAs, retail lots, and industrial yards.
Before we wrap up, we walk the repair with you to confirm the seams, grade, and ride quality, and we flag any nearby cracking that may need crack sealing to stop water intrusion. You receive a written scope, photos if requested, and straightforward guidance on cure time, traffic reopening, and sealcoating timing. The result is a clean, well-compacted patch that restores safety and helps extend the life of the surrounding asphalt.
Yes. We provide a free written estimate after an on-site evaluation so you know the scope, materials, and timeline.
Sometimes. If the existing surface and base are stable, an asphalt overlay can be a good option. If the base has failed, we recommend repairs, milling, or reconstruction first.
Light vehicle traffic is often possible after initial cooling, but full curing takes longer. We provide site-specific guidance based on thickness, temperatures, and traffic loads.
Yes. We can restripe after paving or sealcoating, including stall lines, arrows, fire lanes, and ADA stall layouts when provided or confirmed with the property requirements.
Common causes include oxidation from UV exposure, water intrusion into the base, poor compaction, and movement from heavy loads or unstable subgrade. The right fix depends on the crack type and base condition.
Asphalt patching is the fastest, most cost-effective way to correct localized pavement failures like potholes, depressions, utility cuts, and alligator cracking without resurfacing an entire driveway or parking lot. The key is diagnosing why the asphalt failed, then rebuilding the section so it compacts tight, drains correctly, and bonds to the surrounding pavement. Apex Asphalt Riverside handles residential and commercial patching with a process built around proper base prep, hot mix placement, and clean joint work that prevents premature seam cracking.
Not every defect needs the same repair. A surface-level issue might be handled with a hot mix skin patch when the base is sound, while a deeper failure calls for a full-depth patch that replaces compromised asphalt and rebuilds the aggregate base. For uneven areas, we may recommend milling the edges to create a smoother transition that compacts flush and reduces trip hazards and tire impact at the patch line.
Climate and traffic matter. Riverside’s sun and heat accelerate oxidation, making asphalt brittle and more likely to crack at joints, especially where water can reach the base. That is why we focus on straight sawcut edges, tack coat adhesion, tight compaction using rollers or vibratory plates, and a finished surface that sheds water instead of trapping it at the repair boundary.
After patching, we can advise on crack sealing and sealcoating intervals to protect your investment and slow future deterioration. If you are seeing repeating potholes in the same area, standing water, or widespread alligator cracking, we will explain whether spot repair is still the right move or if a larger rehabilitation plan will save money long-term.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Riverside. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
