Residential · Riverside, CA
Potholes spread fast, turn into liability, and keep coming back when the base is weak. Apex Asphalt Riverside has served Riverside since 2015 with pothole repair that fixes the underlying failure, not just the surface.
Good pothole repair starts with prep and base work, not a quick shovel of mix. We sawcut or square the hole to remove cracked edges, then excavate to sound material and clean out fines with brooms and blowers. If the base is soft or pumping, we undercut and rebuild with compacted Class 2 aggregate base in 2-3 inch lifts, using a plate compactor or roller to hit proper density. We apply tack coat (asphalt emulsion) to bond the patch, then place the right mix depth so the repair can carry traffic loads without raveling.
Riverside heat, heavy turning movements, and water intrusion from irrigation or poor drainage can make potholes reappear if the patch is not sealed and finished correctly. We match the repair to the pavement, using hot mix asphalt when available for longer-lasting compaction and cold patch for smaller, urgent safety fixes, then monitor edges for tightness. After placement we compact with a vibratory plate or small roller, finish flush to surrounding grade, and seal the perimeter joint to keep moisture out. For lots with multiple failures, we may recommend infrared asphalt repair or a larger sawcut and patch to address fatigue cracking beyond the visible pothole.
Customers choose us because we explain what failed, what we are fixing, and what is optional versus necessary. You get a licensed and insured asphalt contractor that shows up with the right equipment, controls dust and debris, and protects traffic flow with cones and clear staging. We handle pothole repair for driveways, parking lots, loading areas, and private roads, coordinating around business hours when needed. Clear written estimates, straightforward repair options, and consistent compaction and bonding practices are what keep patches from popping back out.
After the repair, we do a walkthrough to confirm the patch is tight at the edges, level at transitions, and safe for vehicles and pedestrians. You receive a written scope describing cut lines, base repair (if performed), asphalt mix type, and any joint sealing or surface sealing included. We also provide practical maintenance guidance, like cleaning out standing water, addressing drainage, and timing sealcoating so the new patch can cure properly. If the surrounding pavement shows widespread alligator cracking, we will point it out and quote a larger asphalt patch or overlay so you can plan next steps instead of chasing new potholes.
Before we leave, the site is cleaned, loose aggregate is removed, and access is restored as soon as the patch is ready for traffic. We verify grades at wheel paths, entrances, and trip points, and we flag any adjacent failures that could undermine the repair later. You get a repair that is cut clean, compacted in lifts, and bonded with tack coat so it performs like a structural section instead of a plug. When you need fast pothole repair with durable workmanship, we make it simple to schedule and easy to understand what you are paying for.
Yes. We provide a free written estimate after an on-site evaluation so you know the scope, materials, and timeline.
Sometimes. If the existing surface and base are stable, an asphalt overlay can be a good option. If the base has failed, we recommend repairs, milling, or reconstruction first.
Light vehicle traffic is often possible after initial cooling, but full curing takes longer. We provide site-specific guidance based on thickness, temperatures, and traffic loads.
Yes. We can restripe after paving or sealcoating, including stall lines, arrows, fire lanes, and ADA stall layouts when provided or confirmed with the property requirements.
Common causes include oxidation from UV exposure, water intrusion into the base, poor compaction, and movement from heavy loads or unstable subgrade. The right fix depends on the crack type and base condition.
If your asphalt has potholes, the damage is already past the surface layer. Potholes form when water and traffic break down asphalt and the underlying base, then the edges unravel under vehicle loads. Apex Asphalt Riverside performs pothole repair designed to stop the failure cycle, improve safety, and protect the surrounding pavement so the same spot does not keep reopening.
Effective pothole repair starts with diagnosing why the hole formed. If the base is saturated, pumping, or contaminated with fines, a surface patch alone will fail quickly. Our process typically includes squaring the repair area, removing unstable asphalt, undercutting weak base as needed, and rebuilding with properly compacted aggregate before placing asphalt. We use tack coat to bond the new material to the existing pavement, then compact with a plate compactor or roller to lock the mix and reduce future settlement.
Finish work matters as much as the excavation. We compact to a tight, level surface, keep the patch flush with the surrounding grade, and seal joints where appropriate to limit water intrusion. For areas with widespread cracking, we will recommend a larger asphalt patch or an overlay instead of repeated spot repairs, because potholes are often a symptom of broader structural fatigue.
Pothole repair can be scheduled for residential driveways or commercial parking lots, including phased work to keep access open. Request a free written estimate and we will review repair options, timing, and expected performance based on traffic, drainage, and existing pavement condition.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Riverside. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
