Residential · Riverside, CA
Apex Asphalt Riverside has served Riverside since 2015, building and restoring asphalt patios and asphalt sport court surfaces that stay flat, drain right, and play true. We install new courts, repair cracks and low spots, and resurface worn pavement with proper base work, clean edges, and sport-ready striping options.
Prep and base are what make an asphalt sport court last, not just the top layer. We start with layout and grades, then remove failed asphalt and soft subgrade, and proof-roll with a vibratory roller to find weak spots. A typical build-up includes geotextile fabric where needed, 6-12 inches of compacted Class 2 aggregate base (moisture-conditioned and compacted in lifts), and accurate slope planning for drainage. Asphalt is placed with a paver when access allows, then tightened with steel-drum and pneumatic rollers, and we cut clean edges against concrete curbs, mow strips, or headers to prevent unraveling.
Riverside heat, irrigation overspray, and occasional heavy rain all affect patios and courts. We use hot-mix asphalt suited for Southern California, compacted at the right temperatures to reduce raveling and early oxidation. For playability, we correct birdbaths with infrared patching or full-depth repairs, then fine-grade the surface so balls track predictably. Depending on the use, we can add sport coatings over asphalt (acrylic color systems) after proper curing, along with line striping for basketball, pickleball, or multi-use layouts. For patios and light-use recreation areas, we can finish with a smooth mat, saw-cut control joints at concrete tie-ins, and sealcoat at the right time to slow UV and water intrusion.
Riverside property owners choose us because we treat sport surfaces like flatwork, not driveways. Our crew checks slope with lasers, uses a plate compactor and rollers sized for tight court areas, and keeps transitions clean at existing concrete, pavers, and drainage inlets. You get straight answers on whether a surface needs crack filling, skin patching, mill and overlay, or full reconstruction, and we put it in writing before work starts. As a licensed and insured asphalt contractor, we plan around access, noise, and hours so homes, schools, HOAs, and small businesses can keep their schedules.
At the end of the job, we walk the surface with you and verify drainage and smoothness, including edges, corners, and any patched areas. We clean up loose aggregate, protect new asphalt during cure, and review timelines for sport coatings, striping, and sealcoating so you do not trap moisture or scuff the finish early. You receive a clear scope, maintenance guidance (cleaning, crack monitoring, and reseal intervals), and a surface built for consistent bounce and safe footing. If you have an existing court, we can map cracks and propose staged repairs to extend life before a full replacement is necessary.
Yes. We provide a free written estimate after an on-site evaluation so you know the scope, materials, and timeline.
Sometimes. If the existing surface and base are stable, an asphalt overlay can be a good option. If the base has failed, we recommend repairs, milling, or reconstruction first.
Light vehicle traffic is often possible after initial cooling, but full curing takes longer. We provide site-specific guidance based on thickness, temperatures, and traffic loads.
Yes. We can restripe after paving or sealcoating, including stall lines, arrows, fire lanes, and ADA stall layouts when provided or confirmed with the property requirements.
Common causes include oxidation from UV exposure, water intrusion into the base, poor compaction, and movement from heavy loads or unstable subgrade. The right fix depends on the crack type and base condition.
An asphalt sport court is only as good as its base, drainage, and finishing work. Apex Asphalt Riverside installs and repairs asphalt patios and courts for homes, HOAs, schools, and commercial properties, focusing on flatness, predictable ball response, and long-term durability. From new construction to crack repair and resurfacing, we use proven paving methods, hot-mix asphalt, and compaction practices that reduce settling and premature cracking.
For new courts, we start with excavation and subgrade stabilization, then build a compacted aggregate base that supports the asphalt mat without pumping or rutting. We set slopes to move water off the playing area, typically around 1 percent, and confirm elevations at edges, gates, and adjacent concrete. Asphalt placement is done with a paver when access allows, or by handwork where needed, followed by steel-drum and pneumatic rolling to lock in density and minimize raveling.
For repairs, we match the fix to the cause. Thermal cracks and minor checking may be handled with crack filling and sealcoat at the correct cure time, while structural failures need saw-cut removal, base repair, and full-depth patching. Low spots and puddling are corrected with proper leveling, not just sealcoat, and worn surfaces can be restored with a mill and overlay or an asphalt resurfacing layer before sport coatings are applied. If you want a multi-use surface, we can coordinate layout and striping for basketball, pickleball, and other court markings.
If you are planning a new asphalt sport court or trying to bring back a tired surface, we will review access, drainage, thickness options, and a realistic maintenance schedule. You will get a free written estimate and a clear plan that prioritizes base integrity, smooth play, and durable edges for Riverside conditions.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Riverside. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
